Time Refraction of Spin Waves.

We present an experimental study of time refraction of spin waves (SWs) propagating in microscopic waveguides under the influence of time-varying magnetic fields. Using space- and time-resolved Brillouin light scattering microscopy, we demonstrate that the broken translational symmetry along the time coordinate results in a loss of energy conservation for SWs and thus allows for a broadband and controllable shift of the SW frequency. With an integrated design of SW waveguide and microscopic current line for the generation of strong, nanosecond-long, magnetic field pulses, a conversion efficiency up to 39% of the carrier SW frequency is achieved, significantly larger compared to photonic systems. Given the strength of the magnetic field pulses and its strong impact on the SW dispersion relation, the effect of time refraction can be quantified on a length scale comparable to the SW wavelength. Furthermore, we utilize time refraction to excite SW bursts with pulse durations in the nanosecond range and a frequency shift depending on the pulse polarity.

Large Spin-Wave Bullet in a Ferrimagnetic Insulator Driven by the Spin Hall Effect.

Because of its transverse nature, spin Hall effects (SHE) provide the possibility to excite and detect spin currents and magnetization dynamics even in magnetic insulators. Magnetic insulators are outstanding materials for the investigation of nonlinear phenomena and for novel low power spintronics applications because of their extremely low Gilbert damping. Here, we report on the direct imaging of electrically driven spin-torque ferromagnetic resonance (ST-FMR) in the ferrimagnetic insulator Y_{3}Fe_{5}O_{12} based on the excitation and detection by SHEs. The driven spin dynamics in Y_{3}Fe_{5}O_{12} is directly imaged by spatially resolved microfocused Brillouin light scattering spectroscopy. Previously, ST-FMR experiments assumed a uniform precession across the sample, which is not valid in our measurements. A strong spin-wave localization in the center of the sample is observed indicating the formation of a nonlinear, self-localized spin-wave "bullet".

Realization of a spin-wave multiplexer.

Recent developments in the field of spin dynamics--like the interaction of charge and heat currents with magnons, the quasi-particles of spin waves--opens the perspective for novel information processing concepts and potential applications purely based on magnons without the need of charge transport. The challenges related to the realization of advanced concepts are the spin-wave transport in two-dimensional structures and the transfer of existing demonstrators to the micro- or even nanoscale. Here we present the experimental realization of a microstructured spin-wave multiplexer as a fundamental building block of a magnon-based logic. Our concept relies on the generation of local Oersted fields to control the magnetization configuration as well as the spin-wave dispersion relation to steer the spin-wave propagation in a Y-shaped structure. Thus, the present work illustrates unique features of magnonic transport as well as their possible utilization for potential technical applications.

Universal method for separating spin pumping from spin rectification voltage of ferromagnetic resonance.

We develop a method for universally resolving the important issue of separating spin pumping from spin rectification signals in bilayer spintronics devices. This method is based on the characteristic distinction of spin pumping and spin rectification, as revealed in their different angular and field symmetries. It applies generally for analyzing charge voltages in bilayers induced by the ferromagnetic resonance (FMR), independent of FMR line shape. Hence, it solves the outstanding problem that device-specific microwave properties restrict the universal quantification of the spin Hall angle in bilayer devices via FMR experiments. Furthermore, it paves the way for directly measuring the nonlinear evolution of spin current generated by spin pumping. The spin Hall angle in a Py/Pt bilayer is thereby directly measured as 0.021±0.015 up to a large precession cone angle of about 20°.

Unanticipated proximity behavior in ferromagnet-superconductor heterostructures with controlled magnetic noncollinearity.

Magnetization noncollinearity in ferromagnet-superconductor (F/S) heterostructures is expected to enhance the superconducting transition temperature (T(c)) according to the domain-wall superconductivity theory, or to suppress T(c) when spin-triplet Cooper pairs are explicitly considered. We study the proximity effect in F/S structures where the F layer is a Sm-Co/Py exchange-spring bilayer and the S layer is Nb. The exchange-spring contains a single, controllable and quantifiable domain wall in the Py layer. We observe an enhancement of superconductivity that is nonmonotonic as the Py domain wall is increasingly twisted via rotating a magnetic field, different from theoretical predictions. We have excluded magnetic fields and vortex motion as the source of the nonmonotonic behavior. This unanticipated proximity behavior suggests that new physics is yet to be captured in the theoretical treatments of F/S systems containing noncollinear magnetization.

From chaos to selective ordering of vortex cores in interacting mesomagnets.

A spin vortex consists of an in-plane curling magnetization and a small core region (~10 nm) with out-of-plane magnetization. An oscillating field or current induce gyrotropic precession of the spin vortex. Dipole-dipole and exchange coupling between the interacting vortices may lead to excitation of collective modes whose frequencies depend on the core polarities. Here we demonstrate an effective method for controlling the relative core polarities in a model system of overlapping Ni(80)Fe(20) dots. This is achieved by driving the system to a chaotic regime of continuous core reversals and subsequently relaxing the cores to steady-state motion. It is shown that any particular core polarity combination (and therefore the spectral response of the entire system) can be deterministically preselected by tuning the excitation frequency or external magnetic field. We anticipate that this work would benefit the future development of magnonic crystals, spin-torque oscillators, magnetic storage and logic elements.

Thermoelectric detection of spin waves.

We report on the thermoelectric detection of spin waves in Permalloy stripes via the anomalous Nernst effect. Spin waves are locally excited by a dynamic magnetic field generated from a microwave current flowing in a coplanar waveguide placed on top of a Permalloy stripe, which acts as a waveguide for spin waves. Electric contacts at the ends of the Permalloy stripe measure a dc voltage generated along the stripe. Magnetic field sweeps for different applied microwave frequencies reveal, with a remarkable signal-to-noise ratio, an electric voltage signature characteristic of spin-wave excitations. The symmetry of the signal with respect to the applied magnetic field direction indicates that the anomalous Nernst effect is responsible; Seebeck effects, anisotropic magnetoresistance, and voltages due to spin-motive forces are excluded. The dissipation of spin waves causes local heating that drains into the substrate, giving rise to a temperature gradient perpendicular to the sample plane, resulting in the anomalous Nernst voltage.

Direct determination of energy level alignment and charge transport at metal-Alq3 interfaces via ballistic-electron-emission spectroscopy.

Using ballistic-electron-emission spectroscopy (BEES), we directly determined the energy barrier for electron injection at clean interfaces of Alq(3) with Al and Fe to be 2.1 and 2.2 eV, respectively. We quantitatively modeled the sub-barrier BEES spectra with an accumulated space charge layer, and found that the transport of nonballistic electrons is consistent with random hopping over the injection barrier.

Surface spin flip probability of mesoscopic Ag wires.

Spin relaxation in mesoscopic Ag wires in the diffusive transport regime is studied via nonlocal spin valve and Hanle effect measurements performed on Permalloy/Ag lateral spin valves. The ratio between momentum and spin relaxation times is not constant at low temperatures. This can be explained with the Elliott-Yafet spin relaxation mechanism by considering the momentum surface relaxation time as being temperature dependent. We present a model to separately determine spin flip probabilities for phonon, impurity and surface scattering and find that the spin flip probability is highest for surface scattering.

Quantifying spin Hall angles from spin pumping: experiments and theory.

Spin Hall effects intermix spin and charge currents even in nonmagnetic materials and, therefore, ultimately may allow the use of spin transport without the need for ferromagnets. We show how spin Hall effects can be quantified by integrating Ni{80}Fe{20}|normal metal (N) bilayers into a coplanar waveguide. A dc spin current in N can be generated by spin pumping in a controllable way by ferromagnetic resonance. The transverse dc voltage detected along the Ni{80}Fe{20}|N has contributions from both the anisotropic magnetoresistance and the spin Hall effect, which can be distinguished by their symmetries. We developed a theory that accounts for both. In this way, we determine the spin Hall angle quantitatively for Pt, Au, and Mo. This approach can readily be adapted to any conducting material with even very small spin Hall angles.

Negative nonlocal resistance in mesoscopic gold Hall bars: absence of the giant spin Hall effect.

We report the observation of negative nonlocal resistances in multiterminal mesoscopic gold Hall bar structures whose characteristic dimensions are larger than the electron mean-free path. Our results can only be partially explained by a classical diffusive model of the nonlocal transport, and are not consistent with a recently proposed model based on spin Hall effects. Instead, our analysis suggests that a quasiballistic transport mechanism is responsible for the observed negative nonlocal resistance. Based on the sensitivity of our measurements and the spin Hall effect model, we find an upper limit for the spin Hall angle in gold of 0.023 at 4.5 K.

An investigation of models of the IP3R channel in Xenopus oocyte.

We consider different models of inositol 1,4,5-trisphosphate (IP(3)) receptor (IP(3)R) channels in order to fit nuclear membrane patch clamp data of the stationary open probability, mean open time, and mean close time of channels in the Xenopus oocyte. Our results indicate that rather than to treat the tetrameric IP(3)R as four independent and identical subunits, one should assume sequential binding-unbinding processes of Ca(2+) ions and IP(3) messengers. Our simulations also favor the assumption that a channel opens through a conformational transition from a close state to an active state.

Regulatory constraints for the transport of samples and compliance with the World Organisation for Animal Health (OIE) standards for biosecurity and biocontainment.

The International Regulations for transport of infectious substances, including diagnostic specimens, are based on the United Nations Model Regulations and are the standard for transport by all means of transportation including air transport; the International Air Transport Association (IATA) regulation specifically addresses air shipment. In 2005 and 2006 there were major improvements in the procedures for shipping infectious substances. These substances are divided into Category A, which includes primarily cultures of the more pathogenic agents and Category B, all the other substances. Category A shipments must have a Dangerous Goods Certificate and meet other requirements. Category B shipments, which include most diagnostic tissue specimens, do not. These regulations specifically exempt certain substances, including those that have been neutralized or inactivated to destroy pathogens and samples from "normal" animals. The packaging requirements help insure that biocontainment is maintained during shipment to protect the shipper and the environment. The packaging requirements and the shipping procedures provide a chain of custody and assist in supporting biosecurity. The more stringent Category A requirements provide increased biocontainment and biosecurity safeguards for these potentially more dangerous substances. In addition, National requirements, such as import permits and the US select agent requirements, provide an added measure of biocontainment and biosecurity.

Magnetic instability regions in patterned structures: influence of element shape on magnetization reversal dynamics.

We report a time-resolved imaging study of the influence of shape on magnetic instabilities in patterned magnetic structures. We find that in rectangular structures magnetization reversal initiates at the ends and interior simultaneously, while in structures with tapered ends the reversal begins in the middle of the structures and spreads out to the ends. The degree of tapering is important for both the switching field and the time required for full reversal. A model based on the concept of local instability regions yields good agreement with the observed location of the reversal onsets.

Transportation of reagents, reference materials and samples: the international perspective.

The International Regulations for the transport of infectious substances, which could include reagents, reference material and samples, are based on the 13th revision of the United Nations Model Regulations and are the standard for transport of infectious substances by all means of transportation. The 13th revision, effective January 2005 and further amended in March and July 2005, made major improvements in these shipping regulations. They specifically exempt certain substances, including those that have been neutralized or inactivated to destroy any pathogens and samples from "normal" animals. Infectious substances are divided into Category A, which includes primarily cultures of the more pathogenic agents and Category B, which includes all other substances that do not meet the Category A criteria. Tissue specimens, submitted for diagnosis, are included in Category B. Category A shipments must have a Dangerous Goods Certificate and meet other requirements; Category B shipments do not. The National requirements, such as import permits, and certain airline restrictions must also be met.

Cu2O island shape transition during Cu-Au alloy oxidation.

In situ transmission electron microscopy observations of the oxidation of (001) Cu-Au alloys indicate that the Cu2O islands that form undergo a remarkable transformation from an initially compact morphology to a dendritic structure as growth proceeds. Correspondingly, the surface composition becomes nonuniform and the fractal dimension associated with the islands evolves from 2.0 to a stable value of 1.87, indicating a transition in the rate-limiting mechanism of oxidation from oxygen surface diffusion to diffusion of copper through the increasingly gold-rich regions adjacent to the islands.

Worldwide risks of animal diseases: introduction.

Animal diseases impact food supplies, trade and commerce, and human health and well-being in every part of the world. Outbreaks draw the attention of those in agriculture, regulatory agencies, and government, as well as the general public. This was demonstrated by the 2000-2001 foot and mouth disease (FMD) outbreaks that occurred in Europe, South America, Asia and Africa and by the recent increased occurrence of emerging diseases transmitted from animals to humans. Examples of these emerging zoonotic diseases are highly pathogenic avian influenza, bovine spongiform encephalopathy, West Nile virus and severe acute respiratory syndrome. There is also the risk of well-known and preventable zoonotic diseases, such as rabies, brucellosis, leishmaniasis, and echinococcosis/hydatidosis, in certain countries; these diseases have a high morbidity with the potential for a very high mortality. Animal agriculturalists should have a global disease awareness of disease risks and develop plans of action to deal with them; in order to better respond to these diseases, they should develop the skills and competencies in politics, media interactions, and community engagement. This issue of Veterinaria Italiana presents information on the risk of animal diseases; their impact on animals and humans at the international, national, industry, and societal levels; and the responses to them. In addition, specific information is provided on national and international disease monitoring, surveillance and reporting, the risk of spread of disease by bioterrorism and on import risk analysis.

Distribution of bluetongue in the United States of America, 1991-2002.

Bluetongue virus (BTV) distribution in the United States of America (USA) is limited by the range of the vector Culicoides spp. Regional differences exist with the north-eastern states being free of BTV, while the central and north-western states are seasonally free of virus. Activity of the virus can be observed throughout the year in the southern USA. Serological evidence defining the distribution of BTV in selected regions of the USA is gathered regularly through serological surveys conducted on samples from slaughter cattle. From 1991 to 2002, ten serological surveys were completed. Results from Alaska, Hawaii, Michigan, Minnesota, New York, Wisconsin and New England consistently demonstrated a seropositive rate of less than 2%, confirming BTV-free status. Antibody against BTV was sporadically detected in cattle originating from states contiguous to the BTV-free regions. Additional information on BTV distribution in the USA is obtained through identification of BTV or BTV RNA in diagnostic, surveillance and export specimens submitted to the National Veterinary Services Laboratories. Results confirm that BTV serotypes 2, 10, 11, 13 and 17 are present in the USA.

Office International des Epizooties international standards for bluetongue.

Preventing the spread of disease through international trade is one of the primary objectives of the Office International des Epizooties (OIE), the World Organisation for Animal Health. This is accomplished by establishing international standards that facilitate trade while minimising the risk of introducing diseases such as bluetongue (BT). The OIE standards for BT are contained in the Terrestrial animal health code (Code) and the Manual of diagnostic tests and vaccines for terrestrial animals (Manual). These standards include procedures for prompt reporting of BT outbreaks; requirements that should be met for a country or zone to be defined as free of bluetongue virus (BTV); recommendations for the safe importation of live animals, semen and embryos into a BTV-free country or zone; and the general provisions that countries should meet to reduce the risk of spread of BTV through trade. The Manual describes in detail the various tests for the diagnosis of BT. It provides a list of prescribed tests; these are the tests that are required by the Code for the testing of animals in connection with international trade. There are 24 serotypes of BTV and infected countries have the right to restrict imports from countries that have different types of BTV. However, this should only be done if a surveillance and monitoring programme has confirmed that the other types are not present. Zoning for an arbovirus is difficult to apply but zoning for vectors is practicable. Some countries have demonstrated that there is no evidence of infection in their country or parts of their country even though there has been unrestricted animal movement between endemic zones and free zones. This freedom is due to the absence of vectors in the free zone. Based on this observation, free countries and zones can be established if an appropriate surveillance and monitoring programme is in place to define their boundaries. Consequently, there have been extensive changes in the Code to allow the establishment of BTV-free countries and zones and seasonally free countries and zones to provide the basis for safe trade, while minimising the risk of the introduction of BTV.